Zhuohang Precision Machining Factory

FAQs

Zhuohang MES production management dashboard, Dongguan, China

FAQs — Each answer below is the same guidance a DFM review would give before. Tolerances: ±0.003 mm milling, ±0.002 mm turning — ISO 9001 / IATF 16949 verified.

The cost-driven questions, answered directly. Each answer below is the same guidance a DFM review would give before pulling the cost levers, and each can be confirmed in writing against your own drawing.

These are the questions buyers ask us most before they send a drawing. Each answer is backed by the same evidence we would show on a floor visit — certificate numbers, machine counts, and a CMM report — not reassurance. If your part raises a question not listed here, email [email protected].

What actually sets the price of my machined part?

Tolerance, material, process, and batch size. The biggest lever is tolerance — tightening only the features that control function keeps cost down, because every tight dimension adds cutting time and inspection.

How much does a tighter tolerance add to the price?

Milling and turning hold ±0.003 mm (milling) / ±0.002 mm (turning) and grinding holds ±0.002 mm, but tighter is not always better. Every tight dimension forces slower cutting and more inspection, so the cheapest drawing specifies only what function needs.

Which materials keep my part cheapest to machine?

The alloy sets cutting speed, tool wear, and scrap. Aluminum is cheap and fast; stainless work-hardens; titanium is slow and hard on tools. Choosing the cheapest alloy that meets the function is a cost decision.

Does the machining process change what I pay?

3-axis milling is cheapest where the geometry allows; 5-axis earns its cost only when it saves setups; grinding is a premium step for ±0.002 mm surfaces. Routing the part to the cheapest process that holds the tolerance is the whole game.

Will ordering more parts lower my unit cost?

Setup and programming are fixed costs. On a one-off they dominate the unit price; as quantity grows they spread thin. With MOQ 1 piece, you prototype first, then scale on the same process.

What is your minimum order quantity?

One piece. There is no forced production minimum, so you can machine a prototype, validate it, and scale into production on the same drawing and process.

Which materials can you machine?

Aluminum, stainless steel, carbon and alloy steel, brass, copper, titanium, and magnesium, plus engineering plastics. Incoming bar is XRF-checked against the mill certificate before machining.

How do I get a quote with cost-saving suggestions?

Email your STEP, IGES, or 2D drawing to [email protected]. The reply includes a DFM review with cost-saving suggestions and an itemized quote, so the cost levers are pulled before you commit.

Which materials and industries do you cover?

We machine aluminum, stainless steel, titanium, brass, copper, and Inconel, plus engineering plastics including PEEK and Delrin. These parts go into medical, aerospace, automotive, robotics, electronics, and defense applications, with the inspection, traceability, and documentation each sector requires before it places an order.

The shop behind this faqs guide — verified and quotable in one exchange

Backing this guide is a 6,800 m² plant at No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470, running 100+ CNC machines — Mazak VARIAXIS I-600 and INTEGREX I-250H S, TSUGAMI B0206-III/B0205-III, STAR SR-32JII / SR-32J Type N, Citizen Cincom A20-3F7 — plus 3-, 4- and 5-axis milling and turning, 5+ wire EDM and a Hexagon CMM bench with 20+ gauges.

Milling holds ±0.003 mm, turning ±0.002 mm, and grinding or wire EDM ±0.002 mm, all checked on a Hexagon CMM with the 10:1 gauge rule applied to every feature. Capability: Ppk ≥ 1.67 initial and Cpk ≥ 1.33 in production on key characteristics. Certified to ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, design clause 8.3 excluded, openly disclosed) and ISO 14001:2015 (116024/B/0001/UK/En), held by Dongguan Zhuohang Ltd, USCC 91441900MA4UWT6X39, established 2005. Customers across Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa are supplied from China, worldwide. Contact Felipe Iglesias at [email protected] or +86 13126536955 to begin the quote, and ask for the certificate numbers, the machine list and a past CMM report together.

Verifying the supplier — entity, certificates, and floor in one exchange

your decision on a CNC supplier runs through three checks, and each check is verifiable in minutes. The first is the legal entity — the Unified Social Credit Code, 18 digits, verifiable on the National Enterprise Credit Information Publicity System. Dongguan Zhuohang Ltd, USCC 91441900MA4UWT6X39, established 2005, is the entity behind this guide, and the registration is a lookup, not a scan. The second is the certification set — ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, design clause 8.3 excluded — disclosed openly), and ISO 14001:2015 (116024/B/0001/UK/En), held by the same entity and verifiable with the registrar URS. The third is the floor — 100+ CNC machines on a 6,800 m² plant at No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, including Mazak VARIAXIS I-600 five-axis, Mazak INTEGREX I-250H S mill-turn, TSUGAMI B0206-III and B0205-III, STAR SR-32JII and SR-32J Type N, and Citizen Cincom A20-3F7, verified on a live video walk-through.

The tolerance bands held — ±0.003 mm on CNC milling, ±0.002 mm on CNC turning, ±0.002 mm on precision grinding and wire EDM — are the bands the quote is written against, and the Hexagon CMM reports the dimensional result against the band with the 10:1 gauge rule applied to every feature. The capability indices — Ppk ≥ 1.67 initial on key characteristics, Cpk ≥ 1.33 in production — are reported with the band, the subgroup count, the sampling window, and the sigma algorithm stated alongside the index. A capability index without the band and the algorithm is a number that cannot be checked; the facility behind this guide reports all four. The service area spans Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — based in China, serving customers worldwide. Your move is to ask for all three checks in one email — the entity, the certificates, and a past CMM report — and a real manufacturer supplies all three. Contact Felipe Iglesias at [email protected] or +86 13126536955.

Tolerance and the process chain — the band and the evidence

your tolerance question is a process question, not a number. The ±0.003 mm milling and ±0.002 mm turning and grinding bands are held by the machine, the fixture, the tool, the environment, and the inspection — a chain the shop can describe and you can audit. The facility behind this guide runs 100+ CNC machines including Mazak VARIAXIS I-600, Mazak INTEGREX I-250H S, TSUGAMI B0206-III and B0205-III, STAR SR-32JII and SR-32J Type N, and Citizen Cincom A20-3F7, with Hexagon CMM verification and the 10:1 gauge rule. Ppk ≥ 1.67 initial on key characteristics and Cpk ≥ 1.33 in production are reported with the band and the algorithm. Under ISO 9001:2015, IATF 16949:2016 (design clause 8.3 excluded), and ISO 14001:2015. Contact Felipe Iglesias at [email protected] or +86 13126536955 for the band and the evidence.

What buyers ask most

Three questions come up on nearly every enquiry. What is the minimum order? One piece - a single prototype can be machined, checked and iterated before any volume is committed. What is the lead time? Roughly 3 / 7 / 30 days depending on the material and the documentation scope, from a simple aluminium part to a full first-article package. What tolerances can you hold? ±0.003 mm milled and ±0.002 mm turned, verified on a Hexagon CMM, with Ppk 1.67 or better initial and Cpk 1.33 or better in production on critical characteristics. The answers are short because the capability is specific, not vague.

The answers behind the answers

The plant behind these answers is Dongguan Zhuohang Ltd - 6,800 m² in Hengli Town, Dongguan, 100+ CNC machines including Mazak VARIAXIS I-600 and INTEGREX I-250H S, and certification to ISO 9001:2015, IATF 16949:2016 and ISO 14001:2015 with the certificate numbers published and verifiable. The service area covers Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa, with worldwide shipping from Dongguan. Contact Felipe Iglesias at [email protected] or +86 13126536955 with a drawing and a quantity for a specific answer to your specific part.

De-risking a first order

Start with a handful of parts to confirm the routing and the tolerance, then scale. The same machines, the same inspection bench and the same certificate numbers apply to a single piece and a production run alike, so a small first batch is the proof that a large one will hold the same numbers.

What this shop actually runs

We machine every part in our own 6,800 m² plant in Dongguan, China, on 100+ CNC machines with 100+ staff. The machine list by category:

  • 5-axis machining centres (10+) - Mazak VARIAXIS I-600 (510/910/510 mm travel, 12,000 rpm, 22 kW, 71.6 N·m, 30-tool BT40) and Mazak INTEGREX I-250H S (B-axis 0.0001°, 24 kW, 124 N·m, 38-tool HSK-A63). Intended for compound-angle parts, single-setup multi-face prismatic work, and aerospace fittings where datum transfer loss is unacceptable.
  • 3-axis / 4-axis machining centres (50+) - Brother SPEEDIO S500Z2N / S700Z2N (10,000 rpm, 14/21-tool ATC, 0.7 s tool-to-tool, Z-axis 2.2 G) and Mazak VCE-430A L / VCE-570C L (10,000 rpm, 118 N·m, 24-tool ATC). Intended for prismatic parts, plates, brackets, housings.
  • Swiss-type turning centres (10+) - Citizen Cincom A20-3F7 (Φ20 mm, 10,000 rpm), TSUGAMI B0206-III / B0205-III (Φ20 mm, 0.1 µm), STAR SR-32JII / SR-32J Type N (Φ32 mm, 8,000 rpm). Intended for long, slender rotational parts at ±0.002 mm.
  • CNC turning centres (20+) - HEADMAN T70M/1250 (720 mm swing, 117 mm bore, 3,000 rpm, BMT75 12-station turret). Intended for shafts, bushings, flanges up to ±0.002 mm.
  • Wire EDM (5+) - Sodick AQ535L (550/350/300 mm travel, ±20° taper, 800 kg workpiece). Intended for hardened tool steel, internal splines, sharp internal corners that milling cannot reach.
  • Inspection: Hexagon CMM + 20+ gauges - Hexagon CMM for coordinate measurement, plus vision system, profilometer, hardness tester, coating thickness gauge, XRF for material verification. The 10:1 rule (gauge 10x more accurate than the band) is applied to every feature.
  • Machine highlights - VARIAXIS I-600: one-setup multi-face 5-axis + MAZA-CHECK auto-calibration; INTEGREX I-250H S: DONE-IN-ONE mill-turn, B-axis 0.0001° + Ai thermal shield; SPEEDIO S500Z2N / S700Z2N: Z-axis 2.2 G + 0.7 s ATC; Swiss-type: guide-bush switchable + 0.1 µm resolution.

Tolerance: ±0.003 mm CNC milling / ±0.002 mm CNC turning / ±0.002 mm grinding and wire EDM. Capability: Ppk >= 1.67 initial on key characteristics, Cpk >= 1.33 ongoing.

Certificates: ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, with design clause 8.3 excluded, stated openly) and ISO 14001:2015 (116024/B/0001/UK/En), issued to Dongguan Zhuohang Ltd, registration 91441900MA4UWT6X39, founded 2005.

Where we ship: Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — plus other countries and regions worldwide, shipped from our base in Dongguan, China.

Contact: Felipe Iglesias, [email protected], +86 13126536955.

Have a cost question we did not cover?

Email [email protected] or call +86 13126536955 and ask — the answer comes in writing.

Frequently Asked Questions

1. What actually sets the price of my machined part?

Tolerance, material, process, and batch size. The biggest lever is tolerance — tightening only the features that control function keeps cost down, because every tight dimension adds cutting time and inspection.

2. How much does a tighter tolerance add to the price?

In short, Milling and turning hold ±0.003 mm (milling) / ±0.002 mm (turning) and grinding holds ±0.002 mm, but tighter is not always better. Every tight dimension forces slower cutting and more inspection, so the cheapest drawing specifies only what function needs.

3. Which materials keep my part cheapest to machine?

The alloy sets cutting speed, tool wear, and scrap. Aluminum is cheap and fast; stainless work-hardens; titanium is slow and hard on tools. Choosing the cheapest alloy that meets the function is a cost decision.

4. Does the machining process change what I pay?

3-axis milling is cheapest where the geometry allows; 5-axis earns its cost only when it saves setups; grinding is a premium step for ±0.002 mm surfaces. Routing the part to the cheapest process that holds the tolerance is the whole game.

5. Will ordering more parts lower my unit cost?

Setup and programming are fixed costs. On a one-off they dominate the unit price; as quantity grows they spread thin. With MOQ 1 piece, you prototype first, then scale on the same process.

6. What is your minimum order quantity?

One piece. There is no forced production minimum, so you can machine a prototype, validate it, and scale into production on the same drawing and process.

7. Which materials can you machine?

Aluminum, stainless steel, carbon and alloy steel, brass, copper, titanium, and magnesium, plus engineering plastics. Incoming bar is XRF-checked against the mill certificate before machining.

8. How do I get a quote with cost-saving suggestions?

Email your STEP, IGES, or 2D drawing to [email protected]. The reply includes a DFM review with cost-saving suggestions and an itemized quote, so the cost levers are pulled before you commit.

9. Which materials and industries do you cover?

In short, We machine aluminum, stainless steel, titanium, brass, copper, and Inconel, plus engineering plastics including PEEK and Delrin. These parts go into medical, aerospace, automotive, robotics, electronics, and defense applications, with the inspection, traceability, and documentation each sector requires before it places an order.

What payment methods and terms do you accept?

PayPal, Western Union, and bank or wire transfer. For long-term customers we also accept Net 30, Net 45, and Net 60 terms after an approved credit review.

What happens if a machined part has a manufacturing defect?

We provide free repair or remake for parts with manufacturing defects. All repair and remake costs, including return and shipping, are on us.

How quickly do you respond to inquiries?

We respond to every inquiry within 24 hours. Quotations for standard parts are returned within 48 hours; print reviews and DFM feedback are usually back within one business day.

Standards referenced on this page

  • ASTM B211/B211M-19 — Standard Specification for Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
  • ASTM B348/B348M-21 — Standard Specification for Titanium and Titanium Alloy Bars and Billets
  • ISO 9001 — Quality management systems — Requirements